Auto drum refresh, Auto drum refresh …6-65 – TA Triumph-Adler DC 2325 User Manual
Page 233

System Menu
ADVANCED OPERATION GUIDE
6-65
6
Auto Drum Refresh
Auto Drum Refresh may be executed when the machine is turned on the
power or recovered from the low power mode or sleep mode. Auto Drum
Refresh is executed automatically to keep the best image quality by
monitoring its peripheral temperature and humidity.
Set the duration of time to execute Auto Drum Refresh. The table below
shows the available settings.
NOTE:
You can also execute Drum refresh as needed (Refer to Drum
1
Press the System Menu key.
2
Press [T], [Adjustment/Maintenance] and [Change] of Auto Drum Refresh.
3
Select [Off], [On
(Low)] or [On
(High)].
4
Press [OK].
Item
Description
Off
No Auto Drum Refresh performed.
On (Low)
Auto Drum Refresh performed as Standard
(maximum 140 seconds).
On (High)
Auto Drum Refresh performed as Long
(maximum 180 seconds).
Adjustment /Maintenance - Correcting Fine Black Line
Cancel
OK
Status
10/10/2007 10:10
Reduce the visibility of fine black lines if they
appear in a scanned image .
*Small characters will also become less vi
sible.
Off
On(Low)
On(High)