TA Triumph-Adler DC 2325 - Manual (Page 294)

Appendix-2 ADVANCED OPERATION GUIDE
Paper
Basic Paper Specifications
This machine is designed to print on standard copy paper as used in
regular ('dry') copiers and page printers such as laser printers. It also
supports a variety of other types of paper that conform to the specifications
given in this appendix.
Be careful when choosing paper. Paper unsuitable for the machine may
cause jams or may be wrinkled.
Supported Paper
Use standard copy paper for regular copiers or laser printers. The printing
quality will be affected by the quality of paper. Poor quality paper may
result in unsatisfactory output.
Basic Paper Specifications
The following table lists the specifications of paper that is supported with
this machine. Refer to the subsequent sections for further details.
NOTE: Some recycled paper does not meet requirements for use with
this machine as listed in the Basic Paper Specifications shown below,
such as moisture or pulp content. For this reason, we recommend
purchasing a small amount of recycled paper as a sample for testing prior
to use. Choose recycled paper that gives the best printing results and
contains low levels of paper dust.
We are not responsible for the problems occurred from the use of paper
that does not conform to our specifications.
Criteria Specifications
Weight Cassettes: 60 to 120 g/m
2
Multi Purpose tray: 45 to 200 g/m
2
Thickness 0.086 to 0.110 mm
Dimensional accuracy ±0.7 mm
Squareness of corners 90° ±0.2°
Moisture content 4 to 6%
Grain direction Long grain (paper supply direction)
Pulp content 80% or more