TA Triumph-Adler DC 2325 - Manual (Page 88)

Sending Functions
2-14 ADVANCED OPERATION GUIDE
File Format
Select the file format of the image to send.
The table below lists the file formats and their details.
NOTE: When the color mode in scanning has been selected for
Grayscale or Full Color, you can adjust the image quality Regarding color
mode, refer to Color / Grayscale / Monochrome Selection on page 2-25.
When the optional PDF upgrade kit has been installed, you can use PDF
encryption functions. For details, refer to the following PDF Encryption
Functions.
Use the procedure below to select the file format for transmission.
1 Place the originals on the platen.
2 Press the Send key.
3 Press [Type of Original/Transmission] and then [File Format].
4 Select the file format from [PDF], [TIFF], [JPEG], and [High Comp. PDF].
When the color
mode in scanning
has been selected
for Grayscale or Full
Color, set the image
quality.
If the optional PDF
upgrade kit is
installed, press
[Encryption] and
specify the
encryption settings.
File Format
Adjustable range of image
quality
Color mode
PDF 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.) Full Color, Grayscale,
Monochrome
TIFF 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.) Full Color, Grayscale,
Monochrome
JPEG 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.) Full Color, Grayscale
High Comp.
PDF *
* Only displayed when the optional PDF Upgrade Kit is installed.
1 Compression Ratio Priority
to 3 Quality Priority Full Color
Status 10/10/2007 10:10
Place original .
Cancel OK Add Shortcut
Ready to send.
Press [OK] to display
Image Quality
File Format
Destination
Encryption
Low Quality
1
the image.
(High Comp.)
High Quality
(Low Comp.)
Off
TIFF
PDF
JPEG
High Comp.
PDF