TA Triumph-Adler DC 2325 - Manual (Page 290)

Security
8-8 ADVANCED OPERATION GUIDE
System Initialization
Erase the entire hard disk. Initialization should be performed while the
machine is in standby.
CAUTION: If you accidentally turn the main power switch off during
initialization, the hard disk might possibly crash or initialization might fail.
NOTE: If you accidentally turn the main power switch off during
initialization, turn the main power switch on again. Initialization
automatically restarts.
Use the procedure below to initialize the system.
1 Press the System Menu key.
2 Press [T] and then [Security].
3 If the user authentication screen appears, enter the login user name and
login password, and press [Login].
If the user authentication screen does not appear, go to Step 5.
4 Enter the default security password, 000000.
5 Press [Execute] of
System Initialization.
6 Press [Yes] on the screen to confirm the initialization. Initialization starts.
7 When the screen appears to show initialization is completed, press the
Power key, check that the Power key and memory indicators are OFF,
and turn the main power switch off and then on.
Security
Status 10/10/2007 10:10
Data Overwrite Method: Change
Close
Change
Execute
Security Password:
System Initialization: