TA Triumph-Adler DC 2325 - Manual (Page 23)

Copying Functions
ADVANCED OPERATION GUIDE 1-9
1
The table below shows the finished document sizes for the different
original size options.
Use the procedure below to copy mixed sized originals.
1 Place originals on the document processor.
IMPORTANT: When placing originals of different widths, be sure to flush
them against the document width guide toward the back of the machine.
2 Press the Copy key.
3 Press [Org./Paper/Finishing] and then [Mixed Sized Originals].
4 Select [Mixed Sized
Copies] or [Same
Size Copies] as
finish size.
5 Select the combination of originals from [Same Width] and [Diff Width].
When [Same Size Copies] is selected, select [Long Edge Left] or [Short
Edge Left] as the first original orientation.
6 Press [OK].
7 Press the Start key to start copying.
Option Description
Mixed Sized
Copies Originals are detected individually for size and
copied to the same size papers as originals.
Same Size Copies Originals are all copied to the same size papers.
Status 10/10/2007 10:10
Ready to copy. Copies
Cancel OK
Mixed Sized Originals
Press [OK] to display
Add Shortcut
Off
Mixed Sized
Copies
Same Sized
Copies
Long Edge
Left Short Edge
Left
Top Page Direction
1
the image.