TA Triumph-Adler DC 2325 - Manual (Page 181)

System Menu
ADVANCED OPERATION GUIDE 6-13
6
Default Paper Source
Select the default paper source from Cassette 1-4 and Multi Purpose Tray.
NOTE: [Cassette 3] and [Cassette 4] are displayed when the optional
side feeder installed.
Use the procedure below to select the default paper source.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original / Paper Setup and then
[Change] of Default Paper Source.
3 Select a paper
cassette for the
default setting.
4 Press [OK].
Automatic Detection of Originals
Automatically detect originals of special or non-standard size.
The table below lists the special or non-standard original sizes.
Use the procedure below to set automatic detection of originals.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original / Paper Setup and then
[Change] of Original Auto Detect.
Common Settings - Default Paper Source
Select paper cassette for default setting .
Cassette 2 Cassette 3 Cassette 1
Cancel OK
Status 10/10/2007 10:10
Cassette 4 Multi Purpose
Tray
Item Description
A6/Hagaki As A6 and Hagaki are similar in size, select
either one of them for automatic detection.
Folio Select Folio for automatic detection.
11x15" Select the 11×15" size for automatic
detection.