TA Triumph-Adler DC 2325 - Manual (Page 200)

System Menu
6-32 ADVANCED OPERATION GUIDE
4 Press [+] or [–] to
enter the form
density.
5 Press [Select Form].
6 Select the form that
you want to use and
press [OK].
NOTE: Press [Detail] to check File Name, Storing Size (Document size),
Data Size, and Date Stored for the Form.
7 Press [OK].
Form Overlay (Box)
Select the default form and form density from Custom Box for form overlay
for box print jobs.
NOTE: Refer to page 4-28 for Form Overlay (Box).
The table below shows the available settings.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Function Defaults, [T] and [Change]
at Form Overlay(Box).
3 Press [Select Stored Form].
Common Settings - Form Overlay(Copy )
Set the default form overlay for copies .
Select
Stored Form
Density(10 - 100)
100
Off
Cancel OK
Status 10/10/2007 10:10
%
None
Select Form
Select a form.
Date and Time Size Name
Common Settings - Select Form
001/999
Cancel
05/05/2007 09 :10 Document1
Detail
Form for Form Overlay(Copy)
1.1MB
OK
05/05/2007 09 :20 Document2 1.2MB
05/05/2007 09 :30 Document3 2.1MB
05/05/2007 09 :40 Document4 2.2MB
05/05/2007 09 :50 Document5 1.2MB