Epson WorkForce AL-MX300DN - Manual (Page 85)

7. Press the Start button.
The printer starts scanning.
Note:
If a failure occurs while transmitting e-mail, an error report is printed automatically.
Saving Scanned data to a computer (Document Capture Pro/WSD)
1. Press the Scan button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see “Setting Your Originals” on page 50.
3. Press the F4 button on the control panel.
4. Select WSD or Document Capture Pro, and then press the OK button.
Note:
The procedure below uses WSD scan as an example.
5. Select a computer, from the list of connected computers, in which to save scanned data.
6. Press the OK button.
7. Press the Start button.
The printer starts scanning.
AL-MX300 Series User's Guide
Scanning 85