Epson WorkForce AL-MX300DN - Manual (Page 110)

2. Specify the settings. For details about each setting, see “Reception Settings” on page 157.
3. Press the OK button.
Forward number setting
1. Press the Setting button on the control panel.
2. Press the u or d button several times to select Fax Settings and press the OK button.
3. Press the u or d button several times to select Reception Settings and press the OK button.
4. Press the u or d button several times to select Fax Output and press the OK button.
5. Select Forward and click the OK button.
6. Press the u or d button several times to select Forward Number and press the OK button.
7. Enter the forwarding destination fax number directly from the numeric keypad on the control
panel.
8. Press the OK button.
Sending Faxes
Loading documents
You can load the original either on the document table or in the Auto Document Feeder depending on
the type of the original. For details, see “Setting Your Originals” on page 50.
Note:
❏ Before scanning a document, remember to respect the rights of copyright owners. Do not scan
published text or images without first checking their copyright status.
❏ If documents are placed both in the Auto Document Feeder and on the document table, only the
documents in the Auto Document Feeder are scanned.
AL-MX300 Series User's Guide
Faxing (DNF Model Only) 110