Epson WorkForce AL-MX300DN - Manual (Page 171)

The connection test is carried out. The printer is testing a communication to the e-mail server.
Document Error
The paper which is set is not correct. Please check the paper and set it again. For details on how to set
your original, see “Setting Your Originals” on page 50.
Duplex Memory Overflow
There is not enough memory for duplex printing. The printer prints only on the front and ejects the
paper. To clear this error, follow the instructions below.
If Off is selected as the Auto Cont setting on the control panel’s Setup Menu, press the Start button
to print on the back of the next sheet, or cancel the print job. To cancel the print job, see “Canceling a
Print Job” on page 72
If On is selected, printing continues automatically after a certain period of time.
E-mail Transmission Error
E-mail transmission failed. Check the E-mail Server Settings and perform the Connection
Test
. See “E-mail Server Settings” on page 137. For assistance, ask the administrator of the mail
server.
Fax Board Memory Full
Wait until the fax jobs stored in the memory are finished, and then try transmission/reception again.
Faxing cannot begin
Unable to perform fax transmissions or receptions due to insufficient memory in the printer. Wait
until the fax jobs stored in the memory are finished, and then try transmission/reception again.
Fax Communication Error
A fax communication error occurred during transmission due to some cause.
Fax Error/ Fax Error Unable to Fax
An error occurred in the fax unit. Turn off the printer, wait several minutes and then turn it on again. If
the error occurs again, contact your dealer or a qualified customer support person for assistance.
Fax Image Data Error xx
AL-MX300 Series User's Guide
Using the Control Panel 171