Epson WorkForce AL-MX300DN - Manual (Page 136)

Print Job Check can be displayed when you press the Status button on the control panel, which
allows you to skip or cancel print jobs on the job list. The pattern of items displayed on the control
panel can be selected from Display Pattern 1 and Display Pattern 2. Do not select Display
Pattern 1
when the following languages are selected as Language on Setup Menu: ,
.
Local Time Diff.
Specifies the current date and time by entering the time difference from Greenwich Mean time.
Time Setting
Specifies the current date and time by entering them directly.
Date Format
Specifies the format to display the date.
USB Menu
Item Settings (default in bold)
USB I/F *1 On, Off
USB Speed *1 *2 HS, FS
Buffer Size *1 *2 Normal, Maximum, Minimum
*1 After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. While it is
reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is
turned on again.
*2 Available only when USB I/F is set to On.
USB I/F
Allows you to activate or deactivate the USB interface.
USB Speed
Allows you to select the operation mode of USB interface. Selecting HS is recommended. Select FS if HS
does not work on your computer system.
Buffer Size
AL-MX300 Series User's Guide
Using the Control Panel 136