Epson WorkForce AL-MX300DN - Manual (Page 168)

Attached File Size Exceeds Limit
Increase the attached file size limit or make the file smaller. If you select Continue, the printer keeps
scanning the image up to the specified size.
Because "ID Card Copy" is set, "Layout" has been canceled
Both Layout and ID Card Copy cannot be set together. If ID Card Copy is set to On, Layout is set to
Off
.
Because "Layout" is set, "ID Card Copy" has been canceled
Both ID Card Copy and Layout cannot be set together. If Layout is set to On, ID Card Copy is set to
Off
.
Canceling All Job
The printer is canceling all print jobs in the printer memory, including jobs the printer is currently
receiving or printing. This message appears when the Stop button has been pressed down for more
than three seconds.
Canceling Job
The printer is canceling the current print job. This message appears when the Stop button has been
pressed and released within three seconds, or Cancel is selected in the Print Job List menu.
Can’t Print
The print data is deleted because it is incorrect.
Make sure that the appropriate printer driver is being used.
Can’t Print Duplex
The printer has encountered problems during duplex printing. Make sure you are using an
appropriate type and size of paper for the duplex printing. The problem could also be a result of
incorrect settings for the paper source you are using. Pressing the Start button will print the rest of the
print job on only one side of the paper. Press the Stop button to cancel the print job.
Can’t Print Files
There is no printable data in the USB memory.
AL-MX300 Series User's Guide
Using the Control Panel 168