Sending faxes using re-dial, Sending faxes from your computer – Epson WorkForce AL-MX300DN User Manual
Page 114
3. Make sure that your desired recipient is displayed on the LCD panel.
Note:
Make the appropriate settings if necessary. For details about the settings, see “Manual faxing” on
page 112.
4. Press the Start button to start the transmission.
Sending faxes using re-dial
You can send a fax to the last dialed number by simply pressing the Redial/Pause button.
Note:
Once the mode is changed to other than Fax mode, you cannot use the redial function.
1. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see “Setting Your Originals” on page 50.
2. Press the Redial/Pause button on the control panel.
3. Make sure that your desired recipient is displayed on the LCD panel.
Note:
Make the appropriate settings if necessary. For details about the settings, see “Manual faxing” on
page 112.
4. Press the Start button to start the transmission.
Sending faxes from your computer
You can send a fax directly from a computer, instead of printing documents on a computer and
loading them to the printer to be faxed.
To use this function, install EpsonNet PC-FAX from the Software Disc supplied with the printer. For
details on how to use, refer to its Help.
Note:
If your computer does not have a CD/DVD drive, go to the following Epson website to download and
install the software.
AL-MX300 Series User's Guide
Faxing (DNF Model Only) 114