Epson WorkForce AL-MX300DN - Manual (Page 162)

Item Settings (default in bold)
Password Config Menu Change Password: up to 20 characters
Limit Range: Disable, Interface, Config, All
Default Mode Copy, Scan, Print, Fax *
Default
Settings Init All SelecType -
Init Copy Settings -
Init Fax Settings -
Init Scan Settings -
* Available for DNF model only.
Password Config Menu
Specifies an administrator password. When Interface is selected in Limit Range, you need to
enter the password to change interface settings. When Config is selected in Limit Range, you need
to enter the password to change the items you configured.
Default Mode
Specifies the mode to enter when the printer is turned on.
If no button is pressed for more than the set time (default is one minute) which is set for Operation
Time Out
, the mode returns to the mode set for this setting.
Default Settings
Init All SelecType changes the administrator settings to their factory settings.
Init Copy Settings changes copy settings to their factory settings.
Init Fax Settings changes fax settings to their factory settings.
Init Scan Settings changes scan settings to their factory settings.
Support Mode Settings
Enter the SUPPORT MODE by pressing the d Down button while turning the printer on, to make
Support Menu
and Printer Adjust Menu appear.
c Important:
Remove interface cables before you enter the SUPPORT MODE.
AL-MX300 Series User's Guide
Using the Control Panel 162