Epson WorkForce AL-MX300DN User Manual

Page 100

1. Make sure the printer is turned on and paper is loaded in the printer. For information on how to

2. Press the Copy button.

3. Place your original either on the document table or in the Auto Document Feeder. For details on

4. Specify the number of copies using the numeric keypad on the control panel.

5. Press the l or r button several times to select the Basic Setting tab and press the F1 button.

6. Select the paper source using the u or d button and press the OK button.

Note:
When MP tray is selected, specify the paper size and paper type in the MP Tray Settings menu.

7. Press the Start button.

The printer starts copying.

Note:
❏ To cancel copy job, press the Stop button on the control panel while a document is being copied,

and then press the F3 button to select Yes.

❏ Do not turn off the power or press another mode’s button while copying is in progress, as copying

may be performed incorrectly.

AL-MX300 Series User's Guide

Copying 100