Epson WorkForce AL-MX300DN - Manual (Page 29)

i Reset button Use this button to reset the selected setting item or mistakenly entered values
to the default value.
j Start button Use this button to start a copy or scan.
k Numeric key pad Used to enter the number of copies or a zoom value in Copy mode. Also, enters
numeric values, such as the Time Setting in Setup Menu.
l Clear button Use this button to clear the number of copies or delete a character when
entering a text or numbers.
m Status button Use this button to check the status of print and copy jobs, the usage of
consumable products, and any warnings.
n Data light (Green) On when print data is stored in the print buffer (the section of printer memory
reserved for receiving data) but not yet printed.
Flashes when the printer is processing data.
Off when no data remains in the print buffer.
o Error light (Orange) On or flashes when an error has occurred.
p Return button Use this button to return to a higher hierarchical level while doing settings.
q Function buttons (F1 to F4) Use this button to move to a menu displayed on the LCD panel.
DNF model
a Quick-Dial buttons (1 to 12) Use these buttons to transmit a fax to a registered fax number assigned to the
corresponding button.
b Fax Memory button/LED
(Green) Use this button to display the fax document list stored in the printer’s memory.
c Job Memory button Use this button to register frequently used settings for Copy mode and Scan
mode or to call up the settings.
AL-MX300 Series User's Guide
Getting to Know Your Printer 29