Epson WorkForce AL-MX300DN - Manual (Page 158)

Paper Source
Specifies a paper source to be used. If the output paper size does not match the received data size and
Auto
is selected for this setting, the data is printed on a different size of paper.
Duplex
Enables you to do duplex printing when you receive a fax.
Receive Mode
When Auto is selected, the external telephone rings for a specified time before the printer answers to
receive a fax.
When Manual is selected, the external telephone keeps ringing and the printer does not receive the
fax.
Ext. Phone Count
Specifies the how many times the external telephone connected to the printer rings when Auto is
selected in Receive Mode. After the specified ring count, the printer starts receiving the fax.
Fit to Page
When On is selected, faxes that do not match the size of the paper for printing faxes are reduced to fit
the paper that is available. If Off is selected, any part that does not fit within the page may be erased.
Fax Output
Specifies where to save the received data.
Fax to Folder Settings
Specifies a folder connection protocol, shared folder path, user name, password, FTP server connetion
mode, and port number for the destination. Also tests the connection. Up to five folder paths can be
specified.
E-mail Settings
Specifies the e-mail address, the maximum size of e-mail attachments, and the e-mail subject. Also
tests the connection.
AL-MX300 Series User's Guide
Using the Control Panel 158