Using the postscript printer driver with mac os x – Epson WorkForce AL-MX300DN User Manual
Page 263
10. Follow the on-screen instructions for the rest of the installation.
11. When installation is done, click Finish.
Accessing the PostScript printer driver
You can change the PostScript printer driver settings in the PostScript printer driver. To access the
printer driver, see “Accessing the printer driver” on page 250.
Using the PostScript printer driver with Mac OS X
Installing the PostScript printer driver
Go to the following Epson support website to download and install the driver.
tside Europe)
Selecting the printer
After installing the PostScript 3 printer driver, you need to select the printer.
In a network environment
Note:
❏ You need to make the settings for your installed options manually when the printer is connected
using USB, IP printing, or Bonjour.
❏ Make sure to specify ASCII as the data format in the application.
1. Open the System Preferences, and then double-click the Print & Fax ("Print & Scan" for Mac OS X
10.8 or 10.7) icon.
The Print & Fax ("Print & Scan" for Mac OS X 10.8 or 10.7) window appears.
2. Click
in the Printers window.
3. Select the printer name that you are using from the printer name box.
Note:
If your printer is not listed, check that it is correctly connected to the computer and that the printer is
on.
4. Click Add.
AL-MX300 Series User's Guide
About the Printer Software 263