Epson WorkForce AL-MX300DN - Manual (Page 231)

Cause What to do
The transfer roller may be dusty. Perform BTR Cleaning in the Printer Adjust Menu. See
“Printer Adjust Menu” on page 163 for details.
The fixing temperature may not be appropriate. Try to lower the temperature by adjusting the Temp settings in the
Printer Adjust Menu
. However, do this at your risk, as lowering
the temperature too far may prevent normal fixing. See“Printer
Adjust Menu” on page 163 for details.
Print quality decreased
Cause What to do
The printer cannot print in the required quality level
because of insufficient memory, and the printer lowers
the quality automatically so that the printer can continue
printing. Check to see if the printout is acceptable. If not, lower print quality
temporarily in the printer driver.
If RAM Disk is set to Maximum or Normal on the control panel, you
can increase the available memory space by changing this setting
to Off.
Memory Problems
Insufficient memory for current task
Cause What to do
The printer has insufficient memory for current task. Reduce the contents of print jobs or lower print quality in the
printer driver.
When RAM Disk is set to Maximum or Normal on the control panel,
you can increase the available memory space by changing this
setting to Off.
AL-MX300 Series User's Guide
Troubleshooting 231