Epson WorkForce AL-MX300DN - Manual (Page 147)

Error Sheet
When you select On, the printer prints out an error sheet when an error occurs in the PS3 mode or
when the PDF file you tried to print is not a supported version.
Image Protect
When On is selected, the print quality is not reduced even with insufficient memory. In that case,
Memory Overflow
is displayed and the printing is stopped.
When Off is selected, the print quality is reduced with insufficient memory. In that case, Image
Optimum
is displayed and the printing is continued.
Binary
Specifies the data format. Select On for the Binary data and select Off for the ASCII data.
Note:
Binary can only be used with network connection.
To use the Binary data, make sure your application supports Binary data and that SEND CTRL-D
Before Each Job
and SEND CTRL-D After Each Job are set to No.
When this setting is set to On, you cannot use TBCP (Tagged binary communication protocol) in the
printer driver settings.
Text Detection
When you select On, the text file is converted to a PostScript file when printing. This setting is available
only when you select PS3 in the Emulation Menu.
PDF Page Size
Specifies the paper size when you send the PDF file directory from a computer or some other device. If
Auto
is selected, the paper size is determined based on the size of the first page that is printed.
ESCP2 Menu
Item Settings (default in bold)
Font Courier, Prestige, Roman, Sans serif, Roman T, Orator S, Sans H, Script, OCR A, OCR B
Pitch 10 cpi, 12cpi, 15cpi, Prop.
AL-MX300 Series User's Guide
Using the Control Panel 147