Epson WorkForce AL-MX300DN - Manual (Page 175)

Paper for Printing Faxes Not Loaded
Replace the loaded paper with paper that the fax can be printed on. For details, see “Output paper size”
on page 116.
Paper Out tttt sssss
There is no paper in the specified paper source (tttt). Load paper of the size (sssss) into the paper
source.
Paper Set tttt pppp
The paper loaded in the specified paper source (tttt) does not match the required paper type (pppp).
Replace the loaded paper with the correct paper type and press the Start button to resume printing, or
cancel the print job. To cancel the print job, see “Canceling a Print Job” on page 72.
If you press the Start button without replacing the paper, the printer will print on the loaded paper
even though it does not match the required paper type.
Paper Set tttt sssss
The paper loaded in the specified paper source (tttt) does not match the required paper size (sssss).
Replace the loaded paper with the correct size paper and press the Start button to resume printing, or
cancel the print job. To cancel the print job, see “Canceling a Print Job” on page 72.
If you press the Start button without replacing the paper, the printer will print on the loaded paper
even though it does not match the required size.
Paper Set tttt ssss1 or ssss2
This message appears in the following situations:
- A4/LT Auto Switching in the Setup Menu is set to On
- when printing a job specified as A4 with the printer driver, there is no paper source that is set as A4 or
as LT (alternate size for A4) in the Tray Menu
- when printing a job specified as letter size with the printer driver, there is no paper source that is set as
LT
or as A4 (alternate size for LT ) in the Tray Menu
To clear this warning message, make sure that A4 or as LT is set to the specified paper source (tttt) in
the Tray Menu, load A4 or Letter size paper (ssss1 or ssss2) in the specified paper source (tttt)
and press the Start button, or cancel the print job. To cancel the print job see “Canceling a Print Job”
on page 72.
Photoconductor Needed Soon
AL-MX300 Series User's Guide
Using the Control Panel 175