beautypg.com

Paper jam b (cover b) – Epson WorkForce AL-MX300DN User Manual

Page 206

background image

!

Caution:

Unless specifically instructed in this guide, be careful not to touch the fuser, which is marked

with a caution label, or the surrounding areas. If the printer has been in use, the fuser and the
surrounding areas may be very hot. If you must touch one of these areas, wait 40 minutes to
allow the heat to subside before doing so.

Do not insert your hand deep into the fuser unit as some components are sharp and may cause

injury.

Paper Jam B (Cover B)

1. Open cover B.

2. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammed

paper.

AL-MX300 Series User's Guide

Troubleshooting 206