Epson WorkForce AL-MX300DN - Manual (Page 134)

Specifies whether or not to eject paper when the limit specified in the I/F Time Out setting is
reached. The default is Off, which means paper is not ejected when the time-out limit is reached.
Size Ignore
If you want to ignore a paper size error, select On. When you turn this item on, the printer keeps
printing even if the image size exceeds the printable area for the specified paper size. This may cause
smudges because of the toner that is not transferred onto the paper properly. When this item is turned
off, the printer stops printing if a paper size error occurs.
Auto Cont
When you turn this setting on, the printer automatically continues printing after a certain period of
time when one of the following errors occurs: Paper Set, Print Overrun, or Memory Overflow.
When this option is off, you must press the Start button to resume printing.
Page Protect
Allocates additional printer memory for printing data, as opposed to receiving it. You may need to
turn this setting on if you are printing a very complex page. If a Print Overrun error message appears
on the LCD panel during printing, turn this setting on and reprint your data. This reduces the amount
of memory reserved for processing data so your computer may take longer to send the print job, but it
will allow you to print complex jobs. Page Protect usually works best when Auto is selected.
Note:
Changing the Page Protect setting reconfigures the printer’s memory, which causes any downloaded
fonts to be deleted.
A4/LT Auto Switching
When A4 or Letter size paper is selected for printing and there is no paper source set to the selected
paper size, the printout is output in an alternate paper size (Letter for A4, or A4 for Letter).
Extended Mode
If On is selected, printing continues even after the Replace Toner Cartridge error message
appears on the LCD panel. However, the printing quality is not guaranteed, and the service life of the
photoconductor unit may be affected. When a new toner cartridge is installed, the setting
automatically returns to Off.
LCD Contrast
AL-MX300 Series User's Guide
Using the Control Panel 134