Epson WorkForce AL-MX300DN - Manual (Page 122)

Registering Recipients
When sending faxes using the speed-dial or quick-dial function, you need to register the recipient
information in advance. You can register recipients from the Address Settings menu on the
control panel.
c Important:
While the Fax Memory LED is lit, do not change a recipient setting.
Using the Address Settings menu on the control panel
Registering for speed-dial
You can register up to 500 recipients in the speed-dial list.
1. Press the Setting button on the control panel.
2. Press the u or d button several times to select Address Settings, and then press the OK button.
3. Press the u or d button several times to select Fax No., and then press the OK button.
4. Press the u or d button several times to select Speed Dial Settings, and then press the OK
button.
5. Select an unregistered number displayed as Not Registered using the u and d buttons, and
then press the F3 button to select Editing.
Note:
To change a registered recipient to another one, select the number that you want to replace, and then
press the F3 button.
6. Enter the phone number you want to register, and then press the OK button.
Note:
To correct a number while entering it, use the l and r buttons to select a character and the Clear
button to delete it.
7. Enter a recipient name using the numeric keypad, and then press the OK button.
AL-MX300 Series User's Guide
Faxing (DNF Model Only) 122