Epson WorkForce AL-MX300DN - Manual (Page 133)

Set the time in which operations for the control panel are not interrupted by another print job. If the
specified time has passed, the other print job is executed.
I/F Time Out
Specifies the length of the time, in seconds, before a time out when interfaces are being switched
automatically. The time before a time out occurs is the length of time from the point when no data is
being received from an interface until the point of switching the interface. If the printer has a print job
when switching the interface, the printer prints the print job.
MP Tray Priority
This setting determines whether the MP tray has the highest or lowest priority when Auto is selected
as the Paper Source setting in the printer driver. When Normal is selected as the MP Tray Priority,
the MP tray has the highest priority as the paper source. If you select Last, the MP tray has the lowest
priority.
Manual Feed
Allows you to select the manual feed mode for the MP tray.
Copies
Designates the number of copies to be printed, from 1 through 999.
Duplex
Turns duplex printing on or off. This allows you to print on both sides of a page.
Binding
Specifies the binding direction of the printout.
Start Page
Specifies whether duplex printing starts from the front or back of the page.
Skip Blank Page
Enables you to skip blank pages when printing.
Auto Eject Page
AL-MX300 Series User's Guide
Using the Control Panel 133