Epson WorkForce AL-MX300DN - Manual (Page 183)

The connection test is carried out. The printer is testing to write and save data to the specified shared
folder on the network.
Writing ROM P
This message indicates that a ROM module in the slot is being written. Please wait until this message
disappears.
Wrong Photoconductor
An inappropriate photoconductor unit is installed. Install only the photoconductor unit listed in
“Maintenance Parts” on page 276.
Wrong Toner Cartridge
An inappropriate toner cartridge is installed. Install only the toner cartridge listed in “Consumable
Products” on page 276.
Printing and Deleting Reserve Job Data
Print jobs stored on the printer’s memory using the Re-Print Job, Verify Job, and Confidential Job
options of the Reserve Job function can be printed and deleted using the control panel. Follow the
instructions in this section.
Note:
The RAM Disk setting on the control panel must be set to Normal or Maximum to use the Reserve Job
function.
Printing and Deleting Re-Print Jobs or Verify Jobs
Follow the steps below to print or delete Re-Print Job and Verify Job data.
1. Press the Print button.
AL-MX300 Series User's Guide
Using the Control Panel 183