Epson WorkForce AL-MX300DN - Manual (Page 139)

Alphabetic/Symbol Numeric
# - . * # ! ” , ; : ` _ = / | ’ ?
$ @ % & + ¥ ~ ^ ( ) [ ] { } < > #
Energy Saver Menu
Item Settings (default in bold)
Time to Sleep 1, 3, 5, 15, 30, 60, 120 min
Deep Sleep Mode On, Off
Power Off Timer * On, Off
Time to Off * 120, 180, 240, 360, 480 min
* For DN models sold in the EU only
Time to Sleep
Specifies the length of the time until the printer enters the sleep mode or deep sleep mode if there are
no button operations and no jobs to be printed.
Deep Sleep Mode
When this setting is set to On, the printer switches into the deep sleep mode at the time specified in the
Time to Sleep
setting if the printer is not operated or receives no jobs. In the deep sleep mode, the
Power Saving button lights and more power is saved than when in the sleep mode.
Note:
The printer does not enter the deep sleep mode in the following cases:
- PS3 is selected in Network of Emulation Menu.
- MS Network is set to On in Network Menu.
To recover from the deep sleep mode, press the Power Saving button. The printer recovers
automatically when it receives a print job.
Power Off Timer (Power Off mode) (For DN models sold in the EU only)
When this setting is set to On, the printer automatically turns off at the time specified in the Time to
Off
setting. The printer does not enter the power off mode if it is receiving or sending data.
AL-MX300 Series User's Guide
Using the Control Panel 139