Epson AcuLaser MX20DNF - Manual (Page 96)

❏ To undo any image quality adjustments you make to the preview image, click Reset if available, turn
off the setting, or preview your image again.
Selecting the scan size
You can scan your images at their original size, or you can reduce or enlarge their size as you scan
them. You do this using the Target Size setting.
If you are going to scan your image to a specific size, you should select the Target Size setting after
previewing it, but before adjusting your scan area indicated by creating a marquee. This sets the scan
area to correct proportions so your image will not be cropped unexpectedly.
To select the scan size, see one of these sections.
Home Mode: “Selecting the scan size in Home Mode” on page 96
Professional Mode: “Selecting the scan size in Professional Mode” on page 98
Selecting the scan size in Home Mode
Epson AcuLaser MX21/MX20 Series User's Guide
Scanning 96