Epson AcuLaser MX20DNF - Manual (Page 65)

2. Connect a USB memory to the USB Host interface of the printer.
The printer searches the files in the USB memory. If any supported files are detected, the control
panel menu appears automatically.
Note:
If Can’t Print Files is displayed on the control panel, printable files were not detected in the
USB memory.
3. Press the u UP or d Down button to select the file, then press the OK button.
4. Press the Start button to start printing.
Note:
❏ You can change the settings such as paper size before starting printing. See “Printing Menu” on
page 150 for details about the settings.
❏ The printer supports PDF 1.6 (Acrobat 7). Other versions of PDF files may not print. In that case,
open the files with Adobe Reader and print them from the computer.
❏ If a PDF file is locked with a password, the password screen appears on the control panel. Enter
the password to print the file.
To enter the password, use the numeric key pad. After all characters are determined, press the OK
button.
Epson AcuLaser MX21/MX20 Series User's Guide
Printing 65