Epson AcuLaser MX20DNF - Manual (Page 180)

An e-mail address is not specified. Press the F1 button to select E-mail, press the F1 button again to
select Address, and then specify a destination.
Please choose the folder.
A destination folder is not specified. Press the F1 button to select Save to and specify a destination.
Please specify the address
The printer is ready to send a fax. Enter a recipient fax number using the numeric keypad or specify an
address from the speed-dial list.
Print Overrun
The required time to process the print data exceeded the print engine speed because the current page is
too complex. Select Close to resume printing, or press the Stop button to cancel the print job. If this
message appears again, select - on the printer driver.
If you continue to receive this message when printing a particular page, try simplifying the page by
limiting the number of graphics or reducing the number and size of fonts.
You can also add more memory to the printer as described in “Memory Module” on page 190.
Printer Error Unable to Copy
An error occurred on the printer. Turn off the printer, wait several minutes and then turn it on again.
RAM CHECK
The printer is checking the RAM.
Ready
The printer is ready to receive data and print.
Ready to Copy
The printer is ready to copy.
Replace ADF Unit
The ADF unit has reached the end of its service life and needs to be replaced. If this error occurs,
consult your dealer.
Epson AcuLaser MX21/MX20 Series User's Guide
Using the Control Panel 180