Epson AcuLaser MX20DNF - Manual (Page 84)

Epson Scan prescans your image(s) and displays them in Preview windows.
2. You can do the following to adjust the image(s).
❏ To select your scan area, click the auto locate icon to create a marquee that marks the edges
of your image area. You can move the marquee to change the scan area. See “Creating a
Marquee on a preview image” on page 85 for instructions.
Note:
If you are going to scan at a different size than your original, you must first select your Target
Size
and automatically create a marquee that is proportioned to that size. See “Selecting the scan
size” on page 96 for instructions. You can then copy the marquee and place it on each image you
will scan at that size.
Epson AcuLaser MX21/MX20 Series User's Guide
Scanning 84