Epson AcuLaser MX20DNF - Manual (Page 234)

Memory Problems
Insufficient memory for current task
Cause What to do
The printer has insufficient memory for current task. Add more memory for a permanent solution or lower print quality
temporarily in the printer driver.
Insufficient memory to print all copies
Cause What to do
The printer does not have sufficient memory to collate
print jobs. Reduce the size of print jobs, or increase the available memory on
your printer. See “Installing a memory module” on page 190 for
details.
Paper Handling Problems
Paper does not feed properly
Cause What to do
The paper guides are not set correctly. Make sure that the paper guides in all the paper cassettes and the
MP tray are set to the correct paper size positions.
The paper source setting may not be correct. Make sure that you have selected the correct paper source in your
application.
There may be no paper in the paper source. Load paper into the selected paper source.
The size of loaded paper differs from the control panel or
printer driver settings. Make sure that the correct paper size and paper source are set in
the control panel or printer driver.
Too many sheets may be loaded in the MP tray or paper
cassettes. Make sure that you have not tried to load too many sheets of
paper. For the maximum paper capacity for each paper source,
see “General” on page 274.
If paper does not feed from the optional paper cassette
unit, the unit may not be installed properly. For instructions on installing the unit, see “Optional Paper
Cassette Unit” on page 186.
Epson AcuLaser MX21/MX20 Series User's Guide
Troubleshooting 234