Epson AcuLaser MX20DNF - Manual (Page 149)

Alphabetic/Symbol Numeric
# - . * # ! ” , ; : ` _ = / | ’ ?
$ @ % & + ¥ ~ ^ ( ) [ ] { } < > #
Reset Menu
Clear Warning
Clears warning messages that show errors except for these that occur from consumable products or
mandatory-replacement parts.
Clear All Warnings
Clears all warning messages that appear on the LCD panel.
Reset
Stops printing and clears the current job received from the active interface. You may want to reset the
printer when there is a problem with the print job itself and the printer cannot print successfully.
Reset All
Stops printing, clears the printer memory, and restores the printer settings to their default values. The
print jobs received from all interfaces are erased.
Note:
Performing Reset All clears print jobs received from all interfaces. Be careful not to interrupt someone
else’s job.
Reset Maintenance Counter
Reset the maintenance unit life counter when you replace the maintenance unit. For instructions on
replacing the maintenance unit, see the documentation supplied with the maintenance unit.
Note:
Performing Reset Maintenance Counter stops printing, clears the printer memory, and restores the
printer settings to their default values. Be careful not to interrupt someone else’s job because print jobs
from all interfaces are cleared.
Epson AcuLaser MX21/MX20 Series User's Guide
Using the Control Panel 149