Epson AcuLaser MX20DNF - Manual (Page 128)

The stored job is deleted.
Receiving Faxes
About the reception mode
You can select from four reception modes for receiving a call with this printer.
To change the modes, press the Setting button and specify the Incoming Mode setting of Reception
Settings
in Fax Settings. For details, see “Fax Settings” on page 163.
Setting item Description
Auto Switching (Default) When a call is received, the printer automatically answers after a certain duration
specified by the Ext. Phone Timeout settings.
Note that the external telephone rings during the specified duration if it is attached to
the printer.
Fax Only The printer automatically answers and receives the fax. When external telephone is
attached, it rings at least one time.
Phone Only When a call is received, the attached phone rings.
The printer never automatically answers.
TAM When an external telephone detects a fax/phone signal while answering an incoming
call, the printer automatically receives the fax.
Basics of receiving faxes (automatic receiving)
When the printer receives a fax, the data is stored in the memory and printed automatically.
Note:
You cannot receive a fax under the following conditions.
❏ When you are scanning originals.
❏ When you are sending fax document from a computer.
Epson AcuLaser MX21/MX20 Series User's Guide
Faxing (DNF Model Only) 128