Mca interface ethernet, Mca interface – Emerson SAG581126000 User Manual
Page 29
System Application Guide
SAG581126000
Spec. No. 581126000 (Model 700
NVBA
)
Issue AD, November 23, 2009
Page 29 of 123
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
List 77: MCA Interface Ethernet Option:
WinLink Compatible + Web Interface + Battery Monitoring
Features
♦ Provides an Ethernet circuit card (P/N 524541) and associated mounting hardware.
♦ Ethernet circuit card is WinLink Compatible, provides a Web Interface, and provides
Battery Monitoring.
♦ This option plugs into the MCA.
♦ Allows MCA interface via an Ethernet port.
♦ See
.
Restrictions
Must be located in Main Bay (
Only one interface option (List
,
,
,
, 77, or
) can be installed.
The Ethernet card requires an MCA with firmware version 5.2.0 or later.
Ordering Notes
1) Order this option for each Power System (MCA) to be accessed via WEB Interface.
2) Order optional Front Access Ethernet Connector Kit P/N 525110, as required. This includes an RJ45
connector, mounting bracket, and jumper that mounts in the cutout provided on the front of the MCA
Panel.
3) WinLink Software (List 73) will operate with List 77 but is not required. Internal WEB Pages are preferred.
List 78: MCA Interface Ethernet Option:
WinLink Compatible + Web Interface + SNMP + Battery Monitoring
Features
♦ Provides an Ethernet circuit card (P/N 524541) and associated mounting hardware.
♦ Ethernet circuit card is WinLink Compatible, provides a Web Interface, provides
Battery Monitoring, and provides SNMP.
♦ This option plugs into the MCA.
♦ Allows MCA interface via an Ethernet port.
♦ See
.
Restrictions
Must be located in Main Bay (
Only one interface option (List
,
,
,
,
, or 78) can be installed.
The Ethernet card requires an MCA with firmware version 5.2.0 or later.
Ordering Notes
1) Order this option for each Power System (MCA) to be accessed via WEB Interface.
2) Order optional Front Access Ethernet Connector Kit P/N 525110, as required. This includes an RJ45
connector, mounting bracket, and jumper that mounts in the cutout provided on the front of the MCA
Panel.
3) WinLink Software (List 73) will operate with List 78 but is not required. Internal WEB Pages are preferred.