Supplemental bay (located next to main bay), List 2, 2, and 5). see – Emerson SAG581126000 User Manual
Page 17
System Application Guide
SAG581126000
Spec. No. 581126000 (Model 700
NVBA
)
Issue AD, November 23, 2009
Page 17 of 123
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
13) Order as required additional options per Lists
,
.
14) Order as required any additional accessories described under
.
List 2: Supplemental Bay Common Equipment (Power and Distribution)
(located next to Main Bay)
Features
♦ Provides common equipment for one bussed “power and distribution” bay rated for up to 2000 amperes of
distribution. Includes interbay power busbars and communications cabling.
♦ Mounts to either left or right side of a
♦ Accepts one (1) Distribution Cabinet (options are 3-Row or 4-Row cabinet).
♦ Accepts one (1) Module Mounting Assembly. The Module Mounting Assembly can consist of one (1), two
(2), three (3), or four (4) factory interconnected 8-position Module Mounting Shelves. Each Module
Mounting Shelf in a Module Mounting Assembly provides eight (8) mounting positions for Rectifier
Modules (PCUs).
or
Can be configured for “distribution only” (no Module Mounting Assembly).
Restrictions
Order maximum of one (1) List 2 or
per Power System.
Cannot be used when List 5 is ordered. Order List 2 or List 5, not both.
Supplemental Bays DO NOT accept Converter Modules. DO NOT order List
or
for Supplemental Bays.
List 2 Supplemental Bay DOES NOT accept List
Distribution Cabinet
(List 21 and 22 are not provided with connection points for interbay busbars.)
Rear access is required for installation of inter-bay busbars.
Ordering Notes
1) Order a relay rack per '
' under ACCESSORY DESCRIPTIONS. If required, order Relay Rack
Transition Plates per '
Transition Plates to Mount Relay Rack P/N 543156 on Top of GNB Absolyte IIP
' under ACCESSORY DESCRIPTIONS. Relay rack must be same height as relay rack ordered
for
. A ship loose option is available, as described in '
DESCRIPTIONS.
2) Order one (1) List
or
Distribution Cabinet.
3) Order up to four (4) Distribution Bus Panels as required per '
' and the
capacity of the Distribution Cabinet ordered.
4) Order one (1) List
(interface components for one (1) Module Mounting Assembly). Order a Module
Mounting Assembly per PD588705101/PD588705102/PD588705103/PD58805104. List 30 is factory
connected to the Module Mounting Assembly ordered.
or
Order Supplemental Bay 'Distribution Only' option per List
5) Order Rectifier Modules (PCUs) per List
as required.
6) Order one (1) Module Mounting Position Blank Cover Panel,
, for each empty module
mounting position in the system.
7) Order fuses and/or circuit breakers, as required, per '
' under ACCESSORY
DESCRIPTIONS.
8) Order input and load distribution lugs, as required, per '
' under ACCESSORY
DESCRIPTIONS.