SMA Sunny Data Control V.5.0 - Manual (Page 87)

Managing Data and Saving Data Locally SMA Technologie AG
Technical Description SDC-TEN081450 89
11. 7 Configuring the Automatic Readout
The automatic readout can only be performed if both the PC and Sunny Data Control are on.
With the automatic readout, data is automatically queried from the Sunny Boy Control at intervals
of a length which you define, and is saved in Sunny Data Control. Only the devices displayed on
the page "Spotvalues" are taken into account.
11.7. 1 Starting a New Task
1. Choose "Options / Settings"
2. Select "Automatic Readout".
3. Check "Active"
4. Click on <+>.
Use with Sunny Beam is limited.
With the Sunny Beam, the function "Automatic Readout" only makes sense if the Sunny
Beam is permanently connected to the PC with a USB cable.
Spot value querying is not updated.
During the automatic readout, the spot value querying does not update until the readout
is complete. In the bar at the lower edge of the screen, you can see whether data is
currently being read out (see figure).