SMA Sunny Data Control V.5.0 User Manual
Page 76
Managing Data and Saving Data Locally
SMA Technologie AG
78
SDC-TEN081450
Technical Description
3.
In the "Recording" area there are two options:
-
"All values" = The channels are read at the query cycle intervals set and their values are
recorded in these intervals.
-
"Average values" = The channels are read at the query cycle intervals set, but their values
are recorded at intervals set in the "Averaging over" drop-down menu. The average value
is communicated and recorded only over the analog channels (e.g., Pac, Fac, Uac). In all
other channels the values captured last are the ones recorded. This option can reduce the
amount of data considerably, without losing their significance.
4.
In the area "Autostart", the user can set the start and stop times during which Sunny Data
Control should record all selected measurement channels.
Chapter 11.4. 2 describes how to start the data recording manually.
5.
Click on
The window for setting the data storage opens.
6.
In the field "Name" a name for the settings can be entered.
7.
The data is stored in a user-specific directory by default:
C:\Documents and Settings\“Name of User“\Application Data\SMA\Sunny Data
Control\Plants\“Plant name".If you wish to select a different directory, click on the folder icon.
8.
Click on
The "Select columns" window opens.
9.
In the "Description" drop-down menu, select the date format with which the date should be
shown on the column.