SMA Sunny Data Control V.5.0 - Manual (Page 45)

Initial Settings SMA Technologie AG
Technical Description SDC-TEN081450 47
4. Choose the connection from the drop-down menu "Connection via".
5. In the field "Username", enter username of the owner of the connection.
6. In the field "Password" enter the password given by the owner of the connection.
7. Click on to test the connection settings.
8. Click on to save the settings. The new connection is in the field "Telephone entries".
9. Click on . The "Current device connections" window is displayed once more.
10. In the "Using transport protocol" drop-down list, select the appropriate transport protocol for
the connected device, as described in section 8.3. 6 "Setting the Transport Protocol" (Page 48).
11. Click on .
12. Detect devices as described in chapter 8. 4 "Detecting Devices" (Page 49).
8.3. 5 Sunny Beam (USB)
1. Choose "Options / Settings"
The "Settings" window opens.
2. Select "Communication".
3. Choose "Sunny Beam" from the drop-down list "Connection via".
4. If you wish to see which Sunny Beam devices are already detected, click on .
5. Click on .
6. Detect devices as described in chapter 8. 4 "Detecting Devices" (Page 49).