SMA Sunny Data Control V.5.0 - Manual (Page 42)

Initial Settings SMA Technologie AG
44 SDC-TEN081450 Technical Description
Bits per second (Baudrate)
6. In the "Bits per second:" drop-down list, select the Baudrate.
- In the case of a connection via the USB service interface: 1200 Bits per second.
- If the Sunny Boy Control is connected to the PC via RS232, with a cable length under 15
m: 19,200 Bits per second.
7. Click on .
Transport Protocol
Clicking on , the drop-down menu for the transport protocol is shown.
You can leave the preset transport protocol "SMANet + SunnyNet (autom.)" as the setting. Further
details are described in chapter 8.3. 6 "Setting the Transport Protocol" (Page 48).
8. Click on .
9. Detect devices as described in chapter 8. 4 "Detecting Devices" (Page 49).
8.3. 3 Modem
1. Choose "Options / Settings"
The "Settings" window opens.
2. Select "Communication".
3. Choose "Modem" from the drop-down menu "Connection via".
4. Click on .
5. Enter the telephone number.
6. In the "Using transport protocol" drop-down list, select the appropriate transport protocol for
the connected device, as described in section 8.3. 6 "Setting the Transport Protocol" (Page
48).
7. Click on .
8. Detect devices as described in chapter 8. 4 "Detecting Devices" (Page 49).