SMA Sunny Data Control V.5.0 - Manual (Page 50)

Setting Parameters (Installer) SMA Technologie AG
52 SDC-TEN081450 Technical Description
3. Click on the channel to be edited.
The "New parameter value" window opens.
4. Enter the new parameter value or choose it (this depends on the parameter. The changes are
not applied immediately. The parameter changed is marked for transfer with a blue point and
bold type.
5. If the new parameter value is to be applied to all devices of the same type, check the field "For
all devices with same type".
6. Click on .
The channel changed is marked.
Accept changes
7. To apply all changes click on on the lower edge of the screen. If the changes are
accepted by all devices successfully, the markings (blue point, bold type) are deleted.
• Edit: Edit the selected channel (or double click).
• Update: Updates the channel list displayed.
• Apply: Applies all changes and sets the parameters in the devices.
• Abort: No changes are made.