SMA Sunny Data Control V.5.0 - Manual (Page 56)

Displaying Data SMA Technologie AG
58 SDC-TEN081450 Technical Description
10. 2 Choose the channels for spot value readings.
For each device, you can set up which spot values are to be displayed on the page "Spot values"
on the device field (A) and in the individual device information (B).
You can retrieve the individual device information by right-clicking on the desired device on the
page "Spot values", and choosing "individual device information (see also chapter10. 6 "Accessing
Individual Device Information" (Page 63)).
1. Right click on the device field on the page "Spot values".
The task menu opens.
2. Select "Channel selection for Spot value scan"
The window for setting the selected device's channels opens.
3. Under "Channel selection is valid for", select whether you wish to set the channel selection for
the selected device only, or for all devices of a particular type.
4. Use the arrow buttons to add or remove the desired channels for the respective spot value
queries. To select several channels, hold down the control key.
A
B