SMA Sunny Data Control V.5.0 - Manual (Page 134)

Additional Functions SMA Technologie AG
136 SDC-TEN081450 Technical Description
13 Additional Functions
13. 1 Replacing a Device
If you have to replace an inverter, you can inform Sunny Data Control of the device replacement,
without having to detect the Sunny Boy Control again. If you wish to replace an existing device in
your plant with another, proceed as described in the following.
1. Right click on the device to be replaced on the plant diagram.
2. Select "Exchange Device".
The "Exchange Device" window opens.
3. In the "New device serial number" field, type in the new serial number.
4. Click on .
A confirmation prompt appears, asking whether you really want to delete the device from the
Sunny Boy Control and from Sunny Data Control.
5. Click on to delete the device.
Click on to cancel the procedure.
If you confirm the prompt with Yes, Sunny Data Control replaces the old device in the Sunny
Boy Control with the new device. In so doing, Sunny Data Control attempts to establish a
connection to the new device, and to query the device type.