SMA Sunny Data Control V.5.0 - Manual (Page 48)

Initial Settings SMA Technologie AG
50 SDC-TEN081450 Technical Description
8.4. 1 Narrowing the Scope of Device Detection
The scope of device detection can be limited to the communication devices and the inverters
connected to them, or to an inverter connected directly to the PC.
1. Choose "Options / Settings"
The "Settings" window opens.
2. Select "Misc“.
3. In the area "Device detection mode, searching for" choose the types of device to be detected
in the search.
4. Click on .
5. Start the device detection process, as described in section 8. 4 "Detecting Devices" (Page 49).