SMA Sunny Data Control V.5.0 - Manual (Page 35)

Initial Settings SMA Technologie AG
Technical Description SDC-TEN081450 37
8 Initial Settings
8. 1 Creating Plants
By default, a plant with the name "My Plant" is always created automatically by Sunny Data Control
during installation. You can change the plant name which is displayed in Sunny Data Control, create
additional plants, or delete plants.
Sunny Data Control can only display one plant at a time (current plant). If you manage several
plants, you must first load each respective plant (see section 8. 2 "Loading a Plant" (Page 38)).
Detected devices and settings, such as the communication connection or parameters, always refer
to the respective plant, and are saved as settings for the respective plant.
8.1. 1 Changing Plant Names, Creating / Deleting Plants
Changing the Plant Name
1. "Options/Choose plant"
The "PV Plant" window opens.
2. Select "My PV plant".
3. Click on . The name of the selected plant can now be written over.
4. Type in the desired name for the plant.
5. Click on .