3 removing devices, 4 adding a device, Removing devices – SMA Sunny Data Control V.5.0 User Manual
Page 139: Adding a device
Additional Functions
SMA Technologie AG
Technical Description
SDC-TEN081450
141
13. 3 Removing Devices
1.
Right click on the device on the plant diagram.
2.
Select "Remove Device" or "Remove all Devices", depending on what you wish to delete.
A confirmation prompt is displayed, asking whether the deletion is to be performed.
3.
If you wish to delete the device (or all devices), click on
Cancel with
13. 4 Adding a Device
You can add further sub-devices to a communication device by means of the device serial numbers.
1.
Right click on a Sunny Boy on the plant diagram.
2.
Select "Add Device".
The "Add Device" window opens.
3.
In the "New device serial number" field, type in the serial number of the device to be added.
4.
Click "Add".
Device detection starts for this serial number, and the device is searched for. Wait for the
detection to end.
Directions for the deletion of inverters
If you remove an inverter from the plant tree in Sunny Data Control, this inverter is also
deleted in the Sunny Boy Control!