SMA Sunny Data Control V.5.0 - Manual (Page 81)

Managing Data and Saving Data Locally SMA Technologie AG
Technical Description SDC-TEN081450 83
11. 6 Reading Out Data Saved on the Sunny Boy Control
The Sunny Boy Control records all channels which you have selected for channel recording (see
section 10. 2 "Choose the channels for spot value readings." (Page 58)).
By default, the Sunny Boy Control records the channels "Pac", "E-total" and "Upv" from the detected
inverters. The channels which you wish to read from the Sunny Boy Control must be first marked and
saved as described below.
Upon the first readout, Sunny Data Control saves all of the data recorded at the Sunny Boy Control,
i.e. the complete time range. Afterwards, only new data is read out and saved. How to reset the
time ranges, or to read out the entire time range, is described in sections 11.6. 3 "Resetting Time
Ranges" (Page 86) and 12. 2 "Reading Out the Complete Time Range" (Page 98).
1. Open the tab "Parameters".
The "Channel recording" page is shown, and the devices' channel lists are loaded.
2. To call up a device's channels, click on the device in the plant diagram.