SMA Sunny Data Control V.5.0 - Manual (Page 83)

Managing Data and Saving Data Locally SMA Technologie AG
Technical Description SDC-TEN081450 85
11.6. 1 Storage Time Refresh
Sunny Data Control displays the time ranges of newly recorded values from the communication
device which have not yet been read out (see figure below).
In Sunny Data Control, the time ranges update only when the program is started up. In case you
have kept Sunny Data Control open for a longer period of time, and wish to read out newly
recorded data, you must first update the time ranges.
1. Select "Options / Storage Time Refresh".
The time ranges update.
2. Read out the data as described in chapter 11. 6 "Reading Out Data Saved on the Sunny Boy
Control" (Page 83).
You can also set the time ranges which you wish to read out, as described in chapter 11.6. 2.
11.6. 2 Setting Time Ranges
With Sunny Data Control, you can set the readout time ranges of all channels, or of individual
channels.
1. Click on the chosen channels while holding down the Ctrl key.
2. Right click on a marked channel on the "Channel recording" page.
A menu opens.
3. Choose "Select channel time range".