SMA Sunny Data Control V.5.0 - Manual (Page 55)

Displaying Data SMA Technologie AG
Technical Description SDC-TEN081450 57
10.1. 2 Arranging the Fields
You can change the vertical and horizontal arrangement of the fields in the device overview.
1. Choose "Options / Settings"
2. Select "Spotvalue Request / Arrangement".
3. In the area "Arrangement of devices horizontally / vertically", enter the number of fields that
you wish to have displayed.
Maximum number of fields: 100 x 100.
Minimum number of fields: 1 x 1.
If you wish to increase the number of fields to such an extent that the devices which are
already displayed will no longer have sufficient space to be fully displayed in the new device
overview, the adjustment of scale is ignored.
10.1. 3 Show or Hide the Grid Lines
1. Choose "Options / Settings"
2. Select "Spotvalue Request / Arrangement".
3. In the "Grid lines" area, add or remove the check mark in the "visible" check box.
10.1. 4 Setting the Data Query Sequence
You can set the direction in which Sunny Data Control scans the devices as vertical or horizontal.
1. Choose "Options / Settings"
2. Select "Spotvalue Request / Arrangement".
3. Set the scanning direction in the drop-down menu "Scanning direction".
10.1. 5 Maximizing the Device Overview (Online Display)
You can display the device overview in an enlarged format, covering the entire screen.
1. Open the "Spotvalues" tab.
2. Right click on the page.
The task menu opens.
3. Select "Maximize online display“.
The device overview is shown in an enlarged format, covering the entire screen. The plant
diagram and the menu bar are concealed.
4. To reduce the size of the display again, right click on the page and choose "Minimize online
page".