Grass Valley K2 Media Client System Guide Oct.10 2006 - Manual (Page 98)

98 K2 Media Client System Guide September 7, 2006
Chapter 5 Managing K2 client system software
c. Identify versions as follows:
K2 Server software
Refer to the K2 Storage System Instruction Manual for information about re-installing
K2 Server software.
Control Point software
Follow the onscreen instructions. Click Next and Finish to complete the installation.
Pre-installed software
Software is pre-installed on K2 products when you receive them from the factory.
This load of pre-installed software is referred to as the “golden drive”. Refer to the K2
Media Client Service Manual for a list of pre-installed software. Also refer to K2
Media Client Release Notes for version updates.
Refer to the K2 Storage System Instruction Manual for a list of pre-installed software
on the K2 Media Server.
Backup and recovery strategies
There are three partitions on the K2 Media Client system drive to support backup and
recovery strategies as follows:
• The C: drive is for the Windows operating system and applications.
• The D: drive is for media file system (SNFS) metadata files and media database
data files. This allows you to restore the Windows operating system yet keep your
media metadata intact.
• The E: drive is for storing a system image of the other partitions. From the E: drive
you can restore images to the C: and D: drives. When you receive your K2 Media
Client from the factory, the default factory image is stored on the E: drive.
For more information on backup and recovery strategies, see the K2 Media Client
Service Manual.
System Version These should both report the same version number. This is the K2 System
Software version number, such as 3.1.0.x
RTS Version
Media File System This is the SNFS version, such as 2.6.4.b41